Loading...
FAQs2019-09-20T23:12:35+08:00
The Printing Conditions2019-09-12T15:12:53+08:00

PCL Series

  • Nozzle temperature range: 65°C – 95°C
  • Heat Bed Temp:  35°C – 55°C
  • Recommend for FDM system with Direct-Drive type

PLGA series

PLGA

  • Nozzle temperature range: 175°C – 205°C
  • Heat Bed Temp:  <50°C
  • Recommend for FDM system with Direct-Drive type

PLGA composites

  • Nozzle temperature range: 185°C – 215°C
  • Heat Bed Temp:  <55°C
  • Recommend for FDM system with Direct-Drive type
What 3D Printer Could Print MeDFila®?2019-09-12T23:13:45+08:00

There are three conditions:

  1. Diameter: diameters of MeDFila®, 1.75mm and 3.00mm.
  2. Be sure you can config the printing temperature to the proper range.
    PCL/PCL-Ceramics: Nozzle temperature range: 65°C – 95°C / Heat Bed Temp:  35°C – 55°C
    PLGA: Nozzle temperature range: 175°C – 205°C / Heat Bed Temp:  <50°C
    PLGA-Ceramics:  Nozzle temperature range: 185°C – 215°C / Heat Bed Temp:  <55°C
  3. Recommend for FDM system with Direct-Drive type.(Optional)